Search results

I'm just about to fit a TA bottom bracket. They are not sealed units, as you all know, I'm sure. To prevent ingress from inside the frame, does anyone have a DIY fix for a sheath? There are Tioga ones on Ebay (not cheap).

I have a pair of Mavic Crossland wheels. Rim brake. The rear is 135mm. I have fitted an 8 speed Microshift cassette with a Mavic locking nut. There was a little play, so I fitted a 1.6mm shim. Upon fitting the wheel to 2 separate 135mm rear frames, the cassette binds horribly upon tightening...

The awkward sized ones. Any in Good condition?

My frame is a Robert's with a 68mm shell and 16.5 inch rear stays. Hubs are Mavic 577 8 speed 12-28 spread (26" rims) Chainset is TA Specialities (6 bolt) 24/36/46 I've been on Sheldons site, but still can't get a definitive width for the BB axle. Any gurus out there?

Any going? Must be in good nick for my restoration proj Rings not necessary, but anything complete or just cranks is ideal at this point. Thanks all

Any out there? I have Mavic 577 hubs with their own Mavic specific Freehub. I'm not aware of anything else that fits their pattern, so the hunt is on.

I'm just fitting a Microshift 8 speed cassette to a Mavic Crossland freehub. It all goes on fine, but there is quite a bit of play once the lockring is fitted. Anyone fitted shims before on these?

It's for my Orange Sk8 stem.

Just short of 1. Any in your spares bin?

https://usastore.thebeatles.com/collections/state-bicycles-co/products/the-beatles-x-state-bicycle-co-yellow-submarine-klunker

I'm looking for some thin tyres with a decent cyclo X tread. Something like the Schwalbe Marathon Plus or CX Pro at 1.35 Any ideas?

https://www.ebay.co.uk/itm/334967957140?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=elpaORnqRpa&sssrc=4429486&ssuid=7XMZxWHHRvW&var=&widget_ver=artemis&media=COPY

Seems like a bargain of a chainring. I have Sugino 900. Will it work without ramps and pins? https://www.ebay.co.uk/itm/404380008129?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=mnaej5bfrxw&sssrc=4429486&ssuid=7XMZxWHHRvW&var=&widget_ver=artemis&media=COPY

https://www.ebay.co.uk/itm/324529077765?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ssk6kvKIR3-&sssrc=4429486&ssuid=7XMZxWHHRvW&var=&widget_ver=artemis&media=COPY

https://www.ebay.co.uk/itm/175445682736?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=76SnaobSQu6&sssrc=4429486&ssuid=7XMZxWHHRvW&var=&widget_ver=artemis&media=COPY

I'm just on Lloyd's bike decal site ordering some for my Roberts. There are 2 address variants for the head tube: 87 Penge Road Anerley and 21 Trewsbury Road Sydenham Anyone know which is correct for 1991?

On a NOS chainring I have lying about...

My, as yet, unidentified Roberts frame has a 130mm rear. I'm researching what wheels to put together for it. 8 speed is always my 1st choice. My favourite hubs are Mavic 577. They are over-engineered masterpieces. But, they are 135mm. Last year, I stretched out a steel Ciöcc from 115mm to...

These are needed for my Sugino Mighty 900. Looking for: 20T or 22T (I think they're 58 bcd?) 32T or 34T 42T or 44T Don't have to be Sugino, but it does help if the chain pin is directly above the bolthole. Most others are offset. 5 arm Anyways, thanks again all.

https://www.ebay.co.uk/itm/204207756770?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=DxbLgvT0QzW&sssrc=4429486&ssuid=7XMZxWHHRvW&var=&widget_ver=artemis&media=COPY