Search results for query: *

😍 :cool: Is that the level we are on now - to get to the pub and back all aero for £5 ? Like striving for a personal best before, in and exiting the pub?

Interesting. The old grease question pops up regularly - years and years ago someone did make a good point that many "high performance" products are overkill on a bike since RPM and operating temperatures tend to be low. By far just regular maintenance goes a long way. In my experience looking...

A grease thread, in the road section. And a bonus of a chain lube rant mixed in. I personally find all that's not important and necessary for garage queens and photographs of them to post here. https://www.retrobike.co.uk/threads/grease.456112/

31.6 seat-post would most certainly mean oversized 34.9. A 27.00 - 27.2 post will indeed be very likely to be a 31.8mm FD clamp on a MTB but I would double check with a vernier especially if it is a steel frame. I have a Reynolds 520 road frame with a 27.2mm seat-post but it requires...

First shell width to get right. 2nd spindle / axle length. This will depend on the crank and your frame. An old database is on Sheldon Brown, but best pop the question for your crank here. You can already measure what kind of clearance or Q-factor you need by measuring from the BB centre to...

The only other couple of details missing, but will not really be a concern is chain-stay angle and BB shell width. Only a concern when dealing with larger chain rings for a MTB FD (like in old school DH) or fitting a FD to very old frame with very slack angles. Diameters of the clamp is fairly...

This will be my favourite thread to follow. So much is thread bare in this period and when all said and done what is in your hands is what is in your hands to make the most of. There really is not much to do but to plough on at your own pace and budget and spread news who may be of some very...

My advice would be separate a rebuild vs the cosmetics of it all. A mechanical rebuild is the hardest to see if it works for you. Cosmetics or "finition" is so such at a later stage with a bike like this and needs a careful future consideration. IMHO.

Guys, honestly, lets do out best to support the individual promotor's and their goods and mods to organise this in the future.

The Ideale. It's a while ago now I was looking for one to complete an ultimate ode to what I attempted (the everything icing on the cake) - at the time, they were not cheap on Ebay nor LBC. My bike build budget had already doubled and had to keep to the original which was an Ideale in great...

On a lighter note. Did anyone fcuk around with Humbro paint on their gas pipes and get a bollocking for it?

Honestly, if the Bumble Bee won I would have had my doubts that all you "old farts" gathered in mass because it looks and resembles retro despite the little bit over dreaded cut-off time line. It was the down pull LX FD wasn't it? And rigid forks. And bar ends. Please say it was the bar ends...

With the proposed idea, I can't see a quill stem going down there deep enough - what minimum insert about 70mm? The idea of stuffing something solid and threaded at the top would allow to keep the threaded headset but then would need to use 1" ahead stem with a sleeve and internal thread for...

Seems like a daft idea to begin with. Why cut it in half and make two friction joints that can potentially fail? If it would stand a friction fit why not just stuff an extra 40mm threaded section on the top? Best left to those who have experience in this IMHO.

What a great read that blog about Raymond Wolhauser 😍 Every day a school day here !

Needs to be completely binned and completely re-done with an unfcuked HS by someone familiar with pre-cartridge bearing stuff. IMHO.

BINGO BINGO BINGO 🕺💲🕺💲 Long live the LBS for retro wrenching .....

👍 Gap between crown race and lower fork cup looks too big for me, and heaven forbid hope that is not a crack in the top headset part.

Overflowing with high quality and looks great 🥰 :cool::) For a new freewheel remover I would go with Var, Unior or Cyclus. Even a good quality one especially the prong type can get a beating if regularly used on stubborn freewheels.