richiemaryport
Dirt Disciple
Just bought a 1995 kona cinder cone 18 inch frame.does anyone know what length bottom bracket I need as there's not one on it. Cheers
Kona cinder cone bottom bracket
- Thread starter richiemaryport
- Start date
richiemaryport
Dirt Disciple
Cheers Paul looking at something like stx or similar.so any idea on length?
shinobi
Senior Retro Guru
Re:
Hi
STX would be the same , 110 to 113 ,
here is a link
http://www.sheldonbrown.com/bbsize.html
Cheers Paul
Hi
STX would be the same , 110 to 113 ,
here is a link
http://www.sheldonbrown.com/bbsize.html
Cheers Paul
RadNomad
Senior Retro Guru
Re:
Done this job on two Konas, removing the original bottom brackets.
'96 LavaDome with Shimano STX cranks was originally Shimano BB-LP25 110mm, i replaced it with better/later version BB-UN54 110mm.
'95 CinderCone with Sugino Impel 500 cranks was originally KSS TLS 110mm, replaced it with upgraded Shimano BB-UN74 110mm.
All four BBs were necessarily 68 / BC1.37x24.
Original crank and chainring-to-frame clearances were achieved in both cases.
Done this job on two Konas, removing the original bottom brackets.
'96 LavaDome with Shimano STX cranks was originally Shimano BB-LP25 110mm, i replaced it with better/later version BB-UN54 110mm.
'95 CinderCone with Sugino Impel 500 cranks was originally KSS TLS 110mm, replaced it with upgraded Shimano BB-UN74 110mm.
All four BBs were necessarily 68 / BC1.37x24.
Original crank and chainring-to-frame clearances were achieved in both cases.
