Wanted Rigid fork, preferably Marin

[Tolsey31]

yeah sure. Daft question, but do you know your head tube length, then you can work out if the forks will fit. Steerer tube minus stack height of headset and your head tube should be near that (preferably slightly more I think)

I'll have a measure - what is the stack of that headset on the fork please? Is it a 1" steerer?
Won't be able to do it until the morning.
Cheers, Chris.

 

[pimpdriver]

I'll have a measure - what is the stack of that headset on the fork please? Is it a 1" steerer?
Won't be able to do it until the morning.
Cheers, Chris.

I will go measure.

 

[pimpdriver]

1 1/8” steerer

 

[Tolsey31]

1 1/8” steerer

Thanks - I'll get back to you tomorrow when I know what i've got.

 

[Tolsey31]

1 1/8” steerer

Hi, the head tube is 120mm and is for 1 1/8"

 

[pimpdriver]

Tange Passage OV Threaded Headset

A black 1 1/8' threaded headset with a 36.2mm stack height (30.2 diameter mm cups). The Crown race is 26.4mm internal diameter. Weight - 150g. These use caged ball bearings, keep them greased and this headset will last.

www.sjscycles.co.uk

This should be suitable. Do you want to PM me your address and I’ll get it boxed and sent off. Cheers Steve