What disc brakes fit a Magura FS to IS adapter?

[mattbrown]

How they're machined makes normal disc brakes not fit. When I say normal, it seems like they're all are now pm with an IS adapter, and the design of adapter doesn't fit as the holes don't extend out.

Example of the adapter shown in the link for Avid BB7 brakes

https://www.google.com/search?clien...ih=214&dpr=3#vhid=tjp9qXBxcjHI0M&vssid=mosaic

 

[ishaw]

Is the mount upside down? The adapter looks like an is to is, increasing rotor size a bit.

 

[sam_white]

It doesn't look fitted right to me. I've got a Magura adapter, but haven't tested it yet - am happy to try it out this evening and get back to you if it helps.
Have you fitted following the instructions? Here:

Marzocchi Bomber Z1 - Modern Hope Discs

Hi all, Apologies if this has been asked before. I'm wanting to do a refresh on my 97 Zaskar and it has the classic 97 Orange Marzocchi Bomber Z1's on it. I want to put the a Hope front disc on it (that I could never afford when I was young). Does anyone have any experience of doing this? Not...

www.retrobike.co.uk

 

[sam_white]

It doesn't look fitted right to me

Could be your fork mount is slightly different, with the extended top leg... However that won't affect fitting a PM->IS adapter.

 

[mattbrown]

It doesn't look fitted right to me. I've got a Magura adapter, but haven't tested it yet - am happy to try it out this evening and get back to you if it helps.
Have you fitted following the instructions? Here:

Marzocchi Bomber Z1 - Modern Hope Discs

Hi all, Apologies if this has been asked before. I'm wanting to do a refresh on my 97 Zaskar and it has the classic 97 Orange Marzocchi Bomber Z1's on it. I want to put the a Hope front disc on it (that I could never afford when I was young). Does anyone have any experience of doing this? Not...

www.retrobike.co.uk

Please can you try. I think I've found some old cable discs on ebay that would fit, but nothing that uses a is to pm will fit.

 

[novocaine]

looks fitted right.

Marzocchi Discs Brake Adapters wanted - or 3D CAD Models !?!

Hi MarzocchiManiacs, I have might have the possibility to create 3D printing models using selective lasersintering from aluminium powder. This should make it easy to 3D print such dics adapters (or e.g. the Bombers canti holder). So what I'd like ask is a question to all who have such an...

www.retrobike.co.uk

 

[sam_white]

Here's my adapter fitted to the '98 Z1 Alloy fork:

 

[sam_white]

This is the selection of spare IS to PM adapters I have spare. Plus a Quad cable disc. None of them fit.

 

[sam_white]

These are number 3 and number 8 Hope DH4 calipers. They also do not fit.

 

[sam_white]

The only thing I haven't tried are my 1st gen Magura Julie brakes - the silver ones. Probably a good chance they would work ok.
An IS to PM adapters would probably work with the middle cut out and a bit of filing.